Pegatron Cape 7
Pegatron Cape 7 net top PC
Bought without an operating system which made it very cheap.
It is a tiny device that can either sit on its own stand, or be clamped to the back of a monitor to leave the desktop free.
It has a bright blue power LED bright enough to illuminate a large room at night.
Manufacturer : Pegatron Model . . . : Cape 7 Graphics . . : nVidia Processor . : Intel Atom 230 @ 1.6 GHz (one core or two?) RAM . . . . : 2 Gb (That's 1 Gb on the motherboard and 1 Gb SODIMM.) Hard drive . : 160 Gb FSB . . . . : 533 MHz L1 cache . . : 24 Kb L2 cache . . : 512 Kb
What I have learned
Maximum memory: The 1GB SODIMM can only be replaced with a 2GB SODIMM. With the 1Gb on the motherboard that makes a total of 3Gb.
Linux Mint was installed and runs very well, unless the RAM is exceeded when it runs like a dog.
The original Hitachi 5K320-160 hard drive, model HTS543216L9A300, died after less than two years.
It has an interesting feature in that it will not shut down. When told to do so, it reboots.
It came with an incredibly tiny WiFi USB dongle. It is labelled as a "PEGATRON WL-166N11". I got it working on Windows XP using Mediatek Wireless Utility and an RT2870 driver but Windows says it is a "Ralink RT3070 802.11b/g/n Wireless Lan USB Device" made by Pegatron.
Consumer review: PC Advisor 10th June 2010
Technical spec: Eclipse Computers evaluation
Technical spec: Mesh Technology evaluation
Technical review: Hardware Heaven review
Someone else's site with photos of it in use: link
Taking it apart
My apologies for the out-of-focus photos.
No picture for Linux Mint 18.2 Cinnamon or MATE
To get the boot CD installer to work required the nomodeset trick. It is necessary to follow the instructions for:
- How to enable kernel options on the livecd (before install)
- by editing the boot option to change
- How to temporarily set kernel boot options on an installed OS (not wubi)
- by holding down the Shift key (it is not enough to press it) until the boot menu appears. Then edit the line starting
linux /bootby adding
- How to permanently set kernel boot options on an installed OS (not wubi)
- by editing
"quiet splash nomodeset", then running
I also went into the Driver Manager and enabled the nVidia driver, rebooted, removed the
/etc/default/grub and re-ran
I then enabled
intel-microcode in the Driver Manager since it was offered.